quite a bit, too much to summarize here

packages/Microsoft.Bcl.Build.1.0.14/License-Stable.rtf

@@ -0,0 +1,118 @@
+{\rtf1\ansi\ansicpg1252\deff0\nouicompat\deflang1033{\fonttbl{\f0\fswiss\fprq2\fcharset0 Tahoma;}{\f1\froman\fprq2\fcharset0 Times New Roman;}{\f2\fswiss\fprq2\fcharset0 Calibri;}{\f3\fnil\fcharset0 Calibri;}{\f4\fnil\fcharset2 Symbol;}}
+{\colortbl ;\red31\green73\blue125;\red0\green0\blue255;}
+{\*\listtable 
+{\list\listhybrid
+{\listlevel\levelnfc0\leveljc0\levelstartat1{\leveltext\'02\'00.;}{\levelnumbers\'01;}\jclisttab\tx360}
+{\listlevel\levelnfc4\leveljc0\levelstartat1{\leveltext\'02\'01.;}{\levelnumbers\'01;}\jclisttab\tx363}
+{\listlevel\levelnfc2\leveljc0\levelstartat1{\leveltext\'02\'02.;}{\levelnumbers\'01;}\jclisttab\tx720}\listid1 }
+{\list\listhybrid
+{\listlevel\levelnfc0\leveljc0\levelstartat1{\leveltext\'02\'00.;}{\levelnumbers\'01;}\jclisttab\tx363}
+{\listlevel\levelnfc4\leveljc0\levelstartat1{\leveltext\'02\'01.;}{\levelnumbers\'01;}\jclisttab\tx363}\listid2 }}
+{\*\listoverridetable{\listoverride\listid1\listoverridecount0\ls1}{\listoverride\listid2\listoverridecount0\ls2}}
+{\stylesheet{ Normal;}{\s1 heading 1;}{\s2 heading 2;}{\s3 heading 3;}}
+{\*\generator Riched20 6.2.9200}\viewkind4\uc1 
+\pard\nowidctlpar\sb120\sa120\b\f0\fs24 MICROSOFT SOFTWARE LICENSE TERMS\par
+
+\pard\brdrb\brdrs\brdrw10\brsp20 \nowidctlpar\sb120\sa120 MICROSOFT .NET LIBRARY \par
+
+\pard\nowidctlpar\sb120\sa120\fs19 These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you. Please read them. They apply to the software named above, which includes the media on which you received it, if any. The terms also apply to any Microsoft\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent363{\pntxtb\'B7}}\nowidctlpar\fi-363\li720\sb120\sa120\b0 updates,\par
+{\pntext\f4\'B7\tab}supplements,\par
+{\pntext\f4\'B7\tab}Internet-based services, and\par
+{\pntext\f4\'B7\tab}support services\par
+
+\pard\nowidctlpar\sb120\sa120\b for this software, unless other terms accompany those items. If so, those terms apply.\par
+BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THEM, DO NOT USE THE SOFTWARE.\par
+
+\pard\brdrt\brdrs\brdrw10\brsp20 \nowidctlpar\sb120\sa120 IF YOU COMPLY WITH THESE LICENSE TERMS, YOU HAVE THE PERPETUAL RIGHTS BELOW.\par
+
+\pard 
+{\listtext\f0 1.\tab}\jclisttab\tx360\ls1\nowidctlpar\s1\fi-357\li357\sb120\sa120 INSTALLATION AND USE RIGHTS. \par
+
+\pard 
+{\listtext\f0 a.\tab}\jclisttab\tx363\ls1\ilvl1\nowidctlpar\s2\fi-363\li720\sb120\sa120 Installation and Use.\b0\fs20  You may install and use any number of copies of the software to design, develop and test your programs.\par
+{\listtext\f0 b.\tab}\b\fs19 Third Party Programs.\b0\fs20  The software may include third party programs that Microsoft, not the third party, licenses to you under this agreement. Notices, if any, for the third party program are included for your information only.\b\fs19\par
+
+\pard 
+{\listtext\f0 2.\tab}\jclisttab\tx360\ls1\nowidctlpar\s1\fi-357\li357\sb120\sa120\fs20 ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.\par
+
+\pard 
+{\listtext\f0 a.\tab}\jclisttab\tx363\ls1\ilvl1\nowidctlpar\s2\fi-363\li720\sb120\sa120 DISTRIBUTABLE CODE.\~ \b0 The software is comprised of Distributable Code. \f1\ldblquote\f0 Distributable Code\f1\rdblquote\f0  is code that you are permitted to distribute in programs you develop if you comply with the terms below.\b\par
+
+\pard 
+{\listtext\f0 i.\tab}\jclisttab\tx720\ls1\ilvl2\nowidctlpar\s3\fi-357\li1077\sb120\sa120\tx1077 Right to Use and Distribute. \par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent360{\pntxtb\'B7}}\nowidctlpar\fi-357\li1434\sb120\sa120\b0 You may copy and distribute the object code form of the software.\par
+{\pntext\f4\'B7\tab}Third Party Distribution. You may permit distributors of your programs to copy and distribute the Distributable Code as part of those programs.\par
+
+\pard\nowidctlpar\s3\fi-357\li1077\sb120\sa120\tx1077\b ii.\tab Distribution Requirements.\b0  \b For any Distributable Code you distribute, you must\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent360{\pntxtb\'B7}}\nowidctlpar\fi-357\li1434\sb120\sa120\b0 add significant primary functionality to it in your programs;\par
+{\pntext\f4\'B7\tab}require distributors and external end users to agree to terms that protect it at least as much as this agreement;\par
+{\pntext\f4\'B7\tab}display your valid copyright notice on your programs; and\par
+{\pntext\f4\'B7\tab}indemnify, defend, and hold harmless Microsoft from any claims, including attorneys\rquote  fees, related to the distribution or use of your programs.\par
+
+\pard\nowidctlpar\s3\fi-357\li1077\sb120\sa120\tx1077\b iii.\tab Distribution Restrictions.\b0  \b You may not\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent360{\pntxtb\'B7}}\nowidctlpar\fi-357\li1434\sb120\sa120\b0 alter any copyright, trademark or patent notice in the Distributable Code;\par
+{\pntext\f4\'B7\tab}use Microsoft\rquote s trademarks in your programs\rquote  names or in a way that suggests your programs come from or are endorsed by Microsoft;\par
+{\pntext\f4\'B7\tab}include Distributable Code in malicious, deceptive or unlawful programs; or\par
+{\pntext\f4\'B7\tab}modify or distribute the source code of any Distributable Code so that any part of it becomes subject to an Excluded License. An Excluded License is one that requires, as a condition of use, modification or distribution, that\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent360{\pntxtb\'B7}}\nowidctlpar\fi-358\li1792\sb120\sa120 the code be disclosed or distributed in source code form; or\cf1\f2\par
+{\pntext\f4\'B7\tab}\cf0\f0 others have the right to modify it.\cf1\f2\par
+
+\pard\nowidctlpar\s1\fi-357\li357\sb120\sa120\cf0\b\f0 3.\tab\fs19 SCOPE OF LICENSE. \b0 The software is licensed, not sold. This agreement only gives you some rights to use the software. Microsoft reserves all other rights. Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways. You may not\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent363{\pntxtb\'B7}}\nowidctlpar\fi-363\li720\sb120\sa120 work around any technical limitations in the software;\par
+{\pntext\f4\'B7\tab}reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation;\par
+{\pntext\f4\'B7\tab}publish the software for others to copy;\par
+{\pntext\f4\'B7\tab}rent, lease or lend the software;\par
+{\pntext\f4\'B7\tab}transfer the software or this agreement to any third party; or\par
+{\pntext\f4\'B7\tab}use the software for commercial software hosting services.\par
+
+\pard\nowidctlpar\s1\fi-357\li357\sb120\sa120\b\fs20 4.\tab\fs19 BACKUP COPY. \b0 You may make one backup copy of the software. You may use it only to reinstall the software.\par
+\b\fs20 5.\tab\fs19 DOCUMENTATION. \b0 Any person that has valid access to your computer or internal network may copy and use the documentation for your internal, reference purposes.\par
+\b\fs20 6.\tab\fs19 EXPORT RESTRICTIONS. \b0 The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and regulations that apply to the software. These laws include restrictions on destinations, end users and end use. For additional information, see {\cf2\ul\fs20{\field{\*\fldinst{HYPERLINK www.microsoft.com/exporting }}{\fldrslt{www.microsoft.com/exporting}}}}\f0\fs19 .\cf2\ul\fs20\par
+\cf0\ulnone\b 7.\tab\fs19 SUPPORT SERVICES. \b0 Because this software is \ldblquote as is,\rdblquote  we may not provide support services for it.\par
+\b\fs20 8.\tab\fs19 ENTIRE AGREEMENT. \b0 This agreement, and the terms for supplements, updates, Internet-based services and support services that you use, are the entire agreement for the software and support services.\par
+\b\fs20 9.\tab\fs19 APPLICABLE LAW.\par
+
+\pard 
+{\listtext\f0 a.\tab}\jclisttab\tx363\ls2\ilvl1\nowidctlpar\s2\fi-363\li720\sb120\sa120 United States. \b0 If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles. The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort.\par
+{\listtext\f0 b.\tab}\b Outside the United States. If you acquired the software in any other country, the laws of that country apply.\par
+
+\pard\nowidctlpar\s1\fi-357\li357\sb120\sa120\fs20 10.\tab\fs19 LEGAL EFFECT. \b0 This agreement describes certain legal rights. You may have other rights under the laws of your country. You may also have rights with respect to the party from whom you acquired the software. This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.\par
+\b\fs20 11.\tab\fs19 DISCLAIMER OF WARRANTY. THE SOFTWARE IS LICENSED \ldblquote AS-IS.\rdblquote  YOU BEAR THE RISK OF USING IT. MICROSOFT GIVES NO EXPRESS WARRANTIES, GUARANTEES OR CONDITIONS. YOU MAY HAVE ADDITIONAL CONSUMER RIGHTS OR STATUTORY GUARANTEES UNDER YOUR LOCAL LAWS WHICH THIS AGREEMENT CANNOT CHANGE. TO THE EXTENT PERMITTED UNDER YOUR LOCAL LAWS, MICROSOFT EXCLUDES THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.\par
+
+\pard\nowidctlpar\li357\sb120\sa120 FOR AUSTRALIA \endash  YOU HAVE STATUTORY GUARANTEES UNDER THE AUSTRALIAN CONSUMER LAW AND NOTHING IN THESE TERMS IS INTENDED TO AFFECT THOSE RIGHTS.\par
+
+\pard\nowidctlpar\s1\fi-357\li357\sb120\sa120\fs20 12.\tab\fs19 LIMITATION ON AND EXCLUSION OF REMEDIES AND DAMAGES. YOU CAN RECOVER FROM MICROSOFT AND ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO U.S. $5.00. YOU CANNOT RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, SPECIAL, INDIRECT OR INCIDENTAL DAMAGES.\par
+
+\pard\nowidctlpar\li357\sb120\sa120\b0 This limitation applies to\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent363{\pntxtb\'B7}}\nowidctlpar\fi-363\li720\sb120\sa120 anything related to the software, services, content (including code) on third party Internet sites, or third party programs; and\par
+{\pntext\f4\'B7\tab}claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.\par
+
+\pard\nowidctlpar\sb120\sa120 It also applies even if Microsoft knew or should have known about the possibility of the damages. The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages.\par
+\lang9 Please note: As this software is distributed in Quebec, Canada, some of the clauses in this agreement are provided below in French.\par
+Remarque : Ce logiciel \'e9tant distribu\'e9 au Qu\'e9bec, Canada, certaines des clauses dans ce contrat sont fournies ci-dessous en fran\'e7ais.\par
+
+\pard\nowidctlpar\s1\sb120\sa120\b\lang1033 EXON\'c9RATION DE GARANTIE. \b0 Le logiciel vis\'e9 par une licence est offert \'ab tel quel \'bb. Toute utilisation de ce logiciel est \'e0 votre seule risque et p\'e9ril. Microsoft n\rquote accorde aucune autre garantie expresse. Vous pouvez b\'e9n\'e9ficier de droits additionnels en vertu du droit local sur la protection des consommateurs, que ce contrat ne peut modifier. La ou elles sont permises par le droit locale, les garanties implicites de qualit\'e9 marchande, d\rquote ad\'e9quation \'e0 un usage particulier et d\rquote absence de contrefa\'e7on sont exclues.\par
+\b LIMITATION DES DOMMAGES-INT\'c9R\'caTS ET EXCLUSION DE RESPONSABILIT\'c9 POUR LES DOMMAGES. \b0 Vous pouvez obtenir de Microsoft et de ses fournisseurs une indemnisation en cas de dommages directs uniquement \'e0 hauteur de 5,00 $ US. Vous ne pouvez pr\'e9tendre \'e0 aucune indemnisation pour les autres dommages, y compris les dommages sp\'e9ciaux, indirects ou accessoires et pertes de b\'e9n\'e9fices.\par
+
+\pard\nowidctlpar\sb120\sa120\lang9 Cette limitation concerne :\par
+
+\pard{\pntext\f4\'B7\tab}{\*\pn\pnlvlblt\pnf4\pnindent360{\pntxtb\'B7}}\nowidctlpar\li720\sb120\sa120 tout ce qui est reli\'e9 au logiciel, aux services ou au contenu (y compris le code) figurant sur des sites Internet tiers ou dans des programmes tiers ; et\par
+{\pntext\f4\'B7\tab}les r\'e9clamations au titre de violation de contrat ou de garantie, ou au titre de responsabilit\'e9 stricte, de n\'e9gligence ou d\rquote une autre faute dans la limite autoris\'e9e par la loi en vigueur.\par
+
+\pard\nowidctlpar\sb120\sa120 Elle s\rquote applique \'e9galement, m\'eame si Microsoft connaissait ou devrait conna\'eetre l\rquote\'e9ventualit\'e9 d\rquote un tel dommage. Si votre pays n\rquote autorise pas l\rquote exclusion ou la limitation de responsabilit\'e9 pour les dommages indirects, accessoires ou de quelque nature que ce soit, il se peut que la limitation ou l\rquote exclusion ci-dessus ne s\rquote appliquera pas \'e0 votre \'e9gard.\par
+
+\pard\nowidctlpar\s1\sb120\sa120\b\lang1033 EFFET JURIDIQUE. \b0 Le pr\'e9sent contrat d\'e9crit certains droits juridiques. Vous pourriez avoir d\rquote autres droits pr\'e9vus par les lois de votre pays. Le pr\'e9sent contrat ne modifie pas les droits que vous conf\'e8rent les lois de votre pays si celles-ci ne le permettent pas.\par
+
+\pard\nowidctlpar\sb120\sa120\b\fs20\lang1036\par
+
+\pard\sa200\sl276\slmult1\b0\f3\fs22\lang9\par
+}
+

packages/Microsoft.Bcl.Build.1.0.14/tools/Install.ps1

@@ -0,0 +1,38 @@
+param($installPath, $toolsPath, $package, $project)
+    # This is the MSBuild targets file to add
+    $targetsFile = [System.IO.Path]::Combine($toolsPath, $package.Id + '.targets')
+ 
+    # Need to load MSBuild assembly if it's not loaded yet.
+    Add-Type -AssemblyName 'Microsoft.Build, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'
+
+    # Grab the loaded MSBuild project for the project
+	# Normalize project path before calling GetLoadedProjects as it performs a string based match
+    $msbuild = [Microsoft.Build.Evaluation.ProjectCollection]::GlobalProjectCollection.GetLoadedProjects([System.IO.Path]::GetFullPath($project.FullName)) | Select-Object -First 1
+ 
+    # Make the path to the targets file relative.
+    $projectUri = new-object Uri($project.FullName, [System.UriKind]::Absolute)
+    $targetUri = new-object Uri($targetsFile, [System.UriKind]::Absolute)
+    $relativePath = [System.Uri]::UnescapeDataString($projectUri.MakeRelativeUri($targetUri).ToString()).Replace([System.IO.Path]::AltDirectorySeparatorChar, [System.IO.Path]::DirectorySeparatorChar)
+ 
+    # Add the import with a condition, to allow the project to load without the targets present.
+    $import = $msbuild.Xml.AddImport($relativePath)
+    $import.Condition = "Exists('$relativePath')"
+
+    # Add a target to fail the build when our targets are not imported
+    $target = $msbuild.Xml.AddTarget("EnsureBclBuildImported")
+    $target.BeforeTargets = "BeforeBuild"
+    $target.Condition = "'`$(BclBuildImported)' == ''"
+
+    # if the targets don't exist at the time the target runs, package restore didn't run
+    $errorTask = $target.AddTask("Error")
+    $errorTask.Condition = "!Exists('$relativePath')"
+    $errorTask.SetParameter("Text", "This project references NuGet package(s) that are missing on this computer. Enable NuGet Package Restore to download them.  For more information, see http://go.microsoft.com/fwlink/?LinkID=317567.");
+	$errorTask.SetParameter("HelpKeyword", "BCLBUILD2001");
+
+    # if the targets exist at the time the target runs, package restore ran but the build didn't import the targets.
+    $errorTask = $target.AddTask("Error")
+    $errorTask.Condition = "Exists('$relativePath')"
+    $errorTask.SetParameter("Text", "The build restored NuGet packages. Build the project again to include these packages in the build. For more information, see http://go.microsoft.com/fwlink/?LinkID=317568.");
+	$errorTask.SetParameter("HelpKeyword", "BCLBUILD2002");
+
+    $project.Save()

packages/Microsoft.Bcl.Build.1.0.14/tools/Microsoft.Bcl.Build.targets

@@ -0,0 +1,232 @@
+<!--
+***********************************************************************************************
+Microsoft.Bcl.targets
+
+WARNING:  DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
+          created a backup copy.  Incorrect changes to this file will make it
+          impossible to load or build your projects from the command-line or the IDE.
+
+Copyright (C) Microsoft Corporation. All rights reserved.
+***********************************************************************************************
+-->
+<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <BclBuildImported>true</BclBuildImported>
+  </PropertyGroup>
+  
+  <PropertyGroup Condition="'$(TargetFrameworkIdentifier)' != 'Silverlight' and '$(OutputType)' != 'AppContainerExe'">
+    <!-- 
+      Workaround MSBuild issue that prevents System.Runtime 2.5 and System.Threading.Tasks 2.5 from
+      satisfying indirect dependencies on System.Runtime 1.5 and System.Threading.Tasks 1.5 respectively.  
+    -->
+    <AutoUnifyAssemblyReferences>false</AutoUnifyAssemblyReferences>
+
+    <!-- MSBuild by default doesn't pass the Web.Config ResolveAssemblyReference, in which case, set it so that it sees binding redirects -->
+    <AppConfig Condition="'$(AppConfig)' == '' And '$(WebProjectOutputDir)' != '' And Exists('$(ProjectConfigFileName)')">$(ProjectConfigFileName)</AppConfig>
+  </PropertyGroup>
+
+  <!-- Workaround issue that incorrectly unifies references not in the current profile to the version in the superset of all profiles. -->
+  <Target Name="_BclBuildSetFullFrameworkFolderToProfile" AfterTargets="GetReferenceAssemblyPaths" Condition="'$(TargetFrameworkIdentifier)' == '.NETPortable'">
+    <PropertyGroup>
+      <_FullFrameworkReferenceAssemblyPaths>$(TargetFrameworkDirectory)</_FullFrameworkReferenceAssemblyPaths>
+    </PropertyGroup>
+  </Target>
+
+  <!--
+    *******************************************************************************************************************
+    *******************************************************************************************************************
+                                                                                         EnsureBindingRedirects Section
+    *******************************************************************************************************************
+    *******************************************************************************************************************
+    -->
+  <PropertyGroup>
+    <__IntermediateAppConfig>$(IntermediateOutputPath)$(MSBuildProjectFile).App.config</__IntermediateAppConfig>
+
+    <SkipEnsureBindingRedirects Condition="'$(TargetFrameworkIdentifier)' == 'Silverlight' or '$(OutputType)' == 'AppContainerExe'">true</SkipEnsureBindingRedirects>
+  </PropertyGroup>
+
+  <UsingTask TaskName="EnsureBindingRedirects" AssemblyFile="$(MSBuildThisFileDirectory)Microsoft.Bcl.Build.Tasks.dll" />
+
+  <!-- 
+    ===================================================================================================================
+                                                                                  BclBuildDetermineReferencesToRedirect
+                              
+    Determine which references are opted in for binding redirects
+    ===================================================================================================================
+    -->
+  <Target Name="BclBuildDetermineReferencesToRedirect" BeforeTargets="BclBuildEnsureBindingRedirects" Condition="'$(SkipEnsureBindingRedirects)' != 'true'">
+    <!-- Convention is a file next to the reference with name "ensureRedirect.xml" -->
+    <ItemGroup>
+      <_EnsureBindingRedirectReference Include="@(Reference)"
+                                       Condition="'%(Reference.HintPath)' != '' and Exists('$([System.IO.Path]::GetDirectoryName(&quot;%(Reference.HintPath)&quot;))\\ensureRedirect.xml')" />
+    </ItemGroup>
+  </Target>
+
+  <!-- 
+    ===================================================================================================================
+                                                                                         BclBuildEnsureBindingRedirects
+                              
+    Generate a new app.config with merged binding redirects if we have binding redirects to ensure and it's out of date
+    ===================================================================================================================
+    -->
+  <Target Name="BclBuildEnsureBindingRedirects"
+          DependsOnTargets="BclBuildDetermineReferencesToRedirect"
+          BeforeTargets="ResolveAssemblyReferences"
+          Condition="'@(_EnsureBindingRedirectReference)' != '' and '$(SkipEnsureBindingRedirects)' != 'true'"
+          Inputs="$(MSBuildAllProjects);$(AppConfig);@(_EnsureBindingRedirectReference->'%(HintPath)')"
+          Outputs="$(__IntermediateAppConfig)">
+
+    <EnsureBindingRedirects References="@(_EnsureBindingRedirectReference->'%(HintPath)')"
+                            SourceAppConfigPath="$(AppConfig)"
+                            DestinationAppConfigPath="$(__IntermediateAppConfig)">
+      <Output TaskParameter="DestinationAppConfigPath" ItemName="FileWrites"/>
+    </EnsureBindingRedirects>
+  </Target>
+
+  <!-- 
+    ===================================================================================================================
+                                                                                  BclBuildUpdateAppConfigWithTargetPath
+                              
+    Update project properties to point to the generated app.config
+    ===================================================================================================================
+    -->
+  <Target Name="BclBuildUpdateAppConfigWithTargetPath"
+          DependsOnTargets="BclBuildDetermineReferencesToRedirect;BclBuildEnsureBindingRedirects"
+          BeforeTargets="ResolveAssemblyReferences"
+          Condition="'@(_EnsureBindingRedirectReference)' != '' and '$(SkipEnsureBindingRedirects)' != 'true'">
+    <PropertyGroup>
+      <AppConfig>$(__IntermediateAppConfig)</AppConfig>
+    </PropertyGroup>
+    <ItemGroup>
+      <AppConfigWithTargetPath Remove="@(AppConfigWithTargetPath)" />
+      <AppConfigWithTargetPath Include="$(AppConfig)">
+        <TargetPath>$(TargetFileName).config</TargetPath>
+      </AppConfigWithTargetPath>
+    </ItemGroup>
+  </Target>
+
+
+  <!--
+    *******************************************************************************************************************
+    *******************************************************************************************************************
+                                                                                      ValidatePackageReferences Section
+    
+    This group of targets enables validation of nuget package references when building inside VisualStudio.
+    *******************************************************************************************************************
+    *******************************************************************************************************************
+    -->
+
+  <!-- 
+    ===================================================================================================================
+                                                                                  BclBuildAddProjectReferenceProperties
+                              
+    Adds properties to be set when resolving project references.  The properties ensure that the references get built
+    in the context of the referencer (by changing the set of properties used to build the project) and pass down the
+    context needed to validate the referencing project.
+    ===================================================================================================================
+    -->
+  <Target Name="BclBuildAddProjectReferenceProperties"
+          BeforeTargets="AssignProjectConfiguration"
+          Condition="'$(BuildingInsideVisualStudio)' == 'true'">
+    <PropertyGroup>
+      <_BclBuildProjectReferenceProperties>BclBuildReferencingProject=$(MSBuildProjectFullPath);BclBuildReferencingProjectConfig=$(MSBuildProjectDirectory)\packages.config</_BclBuildProjectReferenceProperties>
+      <_BclBuildProjectReferenceProperties Condition="'$(SkipValidatePackageReferences)' != ''">$(_BclBuildProjectReferenceProperties);SkipValidatePackageReferences=$(SkipValidatePackageReferences)</_BclBuildProjectReferenceProperties>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <ProjectReference>
+        <AdditionalProperties>$(_BclBuildProjectReferenceProperties);%(ProjectReference.AdditionalProperties)</AdditionalProperties>
+      </ProjectReference>
+    </ItemGroup>
+  </Target>
+
+  <!-- 
+    ===================================================================================================================
+                                                                                            BclBuildSetRunningFullBuild
+                              
+    Determines when a full build is running as opposed to a single target.
+    ===================================================================================================================
+    -->
+  <Target Name="BclBuildSetRunningFullBuild"
+          BeforeTargets="BuildOnlySettings">
+    <PropertyGroup>
+      <BclBuildRunningFullBuild>true</BclBuildRunningFullBuild>
+    </PropertyGroup>
+  </Target>
+
+  <!-- 
+    ===================================================================================================================
+                                                                                    GetTargetPath/BclBuildGetTargetPath
+                              
+    MSBuild will only build a target once for a given set of properties.
+    
+    We need that single build of GetTargetPath to run during project reference resolution, so that we can detect a 
+    referencing project that doesn't have Bcl.Build.
+    
+    To accomplish this we replace GetTargetPath with BclBuildGetTargetPath when running a full build.
+    ===================================================================================================================
+    -->
+  <Target
+      Name="GetTargetPath"
+      Condition="'$(BclBuildRunningFullBuild)' != 'true'"
+      DependsOnTargets="$(GetTargetPathDependsOn)"
+      Returns="$(TargetPath)"/>
+
+  <Target
+      Name="BclBuildGetTargetPath"
+      Condition="'$(BclBuildRunningFullBuild)' == 'true'"
+      AfterTargets="GetTargetPath"
+      Returns="$(TargetPath)">
+    <PropertyGroup>
+      <!-- Reset BclBuildRunningFullBuild, it will be set again when doing a full build. -->
+      <BclBuildRunningFullBuild>false</BclBuildRunningFullBuild>
+    </PropertyGroup>
+  </Target>
+
+  <!-- 
+    ===================================================================================================================
+                                                                                 BclBuildValidateNugetPackageReferences
+                              
+    This target validates that any Nuget packages installed in the current project are also installed in projects 
+    referencing the current project.
+    
+    This is necessary because Nuget packages contain more than just simple references.  Installing the package ensures
+        1. The right set of references for the target framework are added
+        2. Config file transforms are applied
+        3. Project installation scripts are run
+       
+    For all packages listed as installed for the current project in packages config, if the package ID matches one
+    specified in @(ValidatePackages), ensure that the same package is installed in the referencing project. 
+    
+    This target can be disabled for a project reference by setting SkipValidatePackageReferences=true for the reference:
+    <ProjectReference Include="..\pcl\pcl.csproj">
+      <Project>{664a9e98-fac7-4567-a046-0dde95fddb48}</Project>
+      <Name>pcl</Name>
+      <Properties>SkipValidatePackageReferences=true</Properties>
+    </ProjectReference>
+    
+    This target can be disabled for all references to a project by adding the following:
+    <PropertyGroup>
+      <SkipValidatePackageReferences>true</SkipValidatePackageReferences>
+    </PropertyGroup>
+    ===================================================================================================================
+    -->
+  <UsingTask TaskName="ValidatePackageReferences" AssemblyFile="$(MSBuildThisFileDirectory)Microsoft.Bcl.Build.Tasks.dll" />
+  <Target Name="BclBuildValidateNugetPackageReferences"
+          Condition="'$(BclBuildRunningFullBuild)' != 'true' AND '$(SkipValidatePackageReferences)' != 'true' AND '$(BuildingInsideVisualStudio)' == 'true'"
+          BeforeTargets="GetTargetPath">
+    <ItemGroup>
+      <ValidatePackages Include="Microsoft.Bcl"/>
+      <ValidatePackages Include="Microsoft.Bcl.Async"/>
+      <ValidatePackages Include="Microsoft.Bcl.Compression"/>
+      <ValidatePackages Include="Microsoft.Net.Http"/>
+    </ItemGroup>
+
+    <ValidatePackageReferences Packages="@(ValidatePackages)"
+                               ReferencingProject="$(BclBuildReferencingProject)"
+                               ReferencingProjectPackagesConfig="$(BclBuildReferencingProjectConfig)"
+                               ReferencedProject="$(MSBuildProjectFullPath)"
+                               ReferencedProjectPackagesConfig="$(MSBuildProjectDirectory)\packages.config"
+                               TreatWarningsAsErrors="$(TreatWarningsAsErrors)" />
+  </Target>
+</Project>

packages/Microsoft.Bcl.Build.1.0.14/tools/Uninstall.ps1

@@ -0,0 +1,26 @@
+param($installPath, $toolsPath, $package, $project)
+ 
+  # Need to load MSBuild assembly if it's not loaded yet.
+  Add-Type -AssemblyName 'Microsoft.Build, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'
+
+  # Grab the loaded MSBuild project for the project
+  # Normalize project path before calling GetLoadedProjects as it performs a string based match
+  $msbuild = [Microsoft.Build.Evaluation.ProjectCollection]::GlobalProjectCollection.GetLoadedProjects([System.IO.Path]::GetFullPath($project.FullName)) | Select-Object -First 1
+
+  # Find all the imports and targets added by this package.
+  $itemsToRemove = @()
+
+  # Allow many in case a past package was incorrectly uninstalled
+  $itemsToRemove += $msbuild.Xml.Imports | Where-Object { $_.Project.EndsWith($package.Id + '.targets') }
+  $itemsToRemove += $msbuild.Xml.Targets | Where-Object { $_.Name -eq "EnsureBclBuildImported" }
+  
+  # Remove the elements and save the project
+  if ($itemsToRemove -and $itemsToRemove.length)
+  {
+     foreach ($itemToRemove in $itemsToRemove)
+     {
+         $msbuild.Xml.RemoveChild($itemToRemove) | out-null
+     }
+     
+     $project.Save()
+  }